Werbung
WARRANTIES - After-sales service
Swimming pool 400x610 - H120 cm
Warranty conditions:
The swimming pool must be assembled within 48 hours of the package being opened.
For the warranty to be valid, a concrete slab must be in place.
Our warranty covers only the replacement of defective parts. It in no way covers demands for compensation or damages. The general warranty does not apply in the following circumstances:
• Use of the equipment in a way which is not in accordance with the instructions.
• Damage incurred as a result of bad handling during and after assembly.
1) Pump : 2 year warranty (electrical problems) under normal usage conditions. The following are not covered by the warranty: Deterioration by abrasion or corrosion, deterioration due to a faulty connection,
equipment dismantled or repaired by a third party, parts breaking (pump base, prefilter cover, hose connector...), running the pump when dry. The warranty is void if the electrical cable and/or the plug are
replaced, removed or damaged
2) Liner : 2 year warranty under normal usage conditions. The following are not covered by the warranty: Punctures, holes, tears, stains (treatment products directly in the water), stains due to algae growth, stains
due to decomposition of foreign bodies in contact with the liner, stains and decolouration due to oxidising products, colourfastness and wear due to rubbing on various surfaces. Deformation of the liner left without
water for more than 24 hours (never empty your swimming pool completely).
3) Filter : 2 year warranty on non-installed products: tank, drainage plug, collar, multiport valves... The following are not covered by the warranty: Watertightness problems following use of pressure greater than the
maximum authorised pressure. (ref. filter notice).
4) Skimmer : 2 year warranty on the seal joints.
5) Wooden structure : 10 year warranty against corrosion and insect attack. The following are not covered by the warranty: Changes in wood colour due to weather, natural deformations (splitting, cracks which
in no way impair the mechanical performance of the wood). The warranty does not cover assembly or storage faults producing deformations in the wall panels (if assembled a long time after the package being
opened), deformation of the planks which in no way impairs the mechanical performance of the swimming pool.
IMPORTANT : The after-sales service will be available only at point of sale.
Essential records for claiming the warranty: - Till receipt/proof of purchase.
- Warranty slip.
- Reference number of the faulty part.
Shop :
City :
Contact department :
Direct tel :
Code
Ref.
Désignation
M-1
7514095
Plank 45x145x1780
M-2
7100015
Plank 45x145x3880
MS-C
7514036
Upper plank 45x135x1780
MS-L
7100045
Upper plank 45x135x3880
2MS
7514039
Upper 1/2 plank 45x67x1780
2MI-C
7514041
Lower 1/2 plank 45x77x1780
2MI-L
7100095
Lower 1/2 plank 45x77x3880
MSS
7514045
Upper skimmer plank 45x135x1780
MIS
7514069
Lower skimmer plank 45x145x1780
MR
7514077
Water jet plank 45x145x1780mm - 2008
PR
7514097
Post 45x135x1275mm (reinforcement)
7514114
Sacrifice part 45x135x280mm
PF
7514113
L-section finish 28x70x1260
C
7514048
Console edging 45x230x170
7514049
Wooden stop block for the skimmer flap 30 x 20 x170
L
7514096
Dressing lath 22x165x1275mm
PL
7100201
Pair of rungs for wooden ladder H120/130
T
7514052
Pine skimmer edging 28x145x600mm (flap)
MSD
7514054
Pine outer right skimmer edging 28x145x526mm
MSG
7514055
Pine outer left skimmer edging 28x145x526mm
MGI-M 7100210
Pine edging 28x145x1529 Int.
MGE-M 7100215
Pine edging 28x145x1653 Ext.
MGI-L
7100227
Pine edging 28x145x3629 Int.
MGE-L 7100229
Pine edging 28x145x3753 Ext.
BM-H
7514011
IPE 120 galvanised cradle - 3590 mm
BM-V
7514012
Complementary IPE 120 galvanised cradle - 1294 mm
7514214
Bag of 12 metal cradle bolts
7514149
Sandbag (25kg)
R
7514016
Hung 2.06 ml hanging rails
7514694
3-step stainless steel ladder
7504397
Poolmax TP 75 pump
7514704
Filtration 400
7514030
Ground protection felt - 200g - 2m x 7m
7504410
Flexible pipe 38 mm diam. - 8 m long
S
7514019
Skimmer
Client :
Address :
City :
Tel :
Qty
Qty
7514173
parcel
ASS
44
Code
Ref.
BREAKDOWN OF THE HARDWARE KIT
14
A
-
Console + reinforcer bag
1
B
-
Cradle cache bag
2
C
-
Hung rails bag
4
FJG
-
Edging screw bag
2
DMP
-
Edging screw bag
2
E
-
Skimmer flap bag
1
G
-
Wooden ladder + finishing profile bag
1
1
10
1
16
20
2
MGI-M
2
1
MGE-M
5
1
1
6
5
2
2
1
2
1
2
10
1
1
1
2
1
1
Hardware kit
1
Qté
Qté
parcel
ASS
1
1
1
1
1
1
1
MGE-L
MSS
MIS
MGI-M
PR
M-1
8
7514004
Blue 75/100 liner 400x610 - H120cm
PL
T
MGI-L
MS-C
BM-H
2MI-C
M-2
2MI-L
MS-L
1
BM-V
Werbung
