Inhaltsverzeichnis
Werbung
19 EC-Konformitätserklärung
This is to declare, in accordance with Directive 94/9/EC, that the following product(s) are designed and
manufactured in accordance with Annex II of Directive 94/9/EC.
The manufacturer attests on their own responsibility that the apparatus has been constructed in accordance with
the principles of good engineering in safety matters, and that any routine verification and test required by Clause
27 of EN 60079-0:2006 has been successfully completed.
Manufacturer:
Manufactured for ABB
by Meriam Process Technologies, 10920 Madison Avenue, Cleveland, Ohio 44102, USA
Product Description:
Multifunction Calibrator with HART Communication Terminals, model series 4150X,
also known as DHH801-MFC 4150X series.
CE 0539
EEx ia IIC T4
DEMKO 08 ATEX 0726203
Intrinsically Safe, Exia
Class I, Div. 1 Groups A, B, C, D: T4
-5º C < Ta < +50º C
Certifying Agency:
UL International DEMKO A/S Testing & Certification (0539)
P.O. Box 514, Lyskaer 8, DK-2730 Herlev, Denmark
This Declaration is based on Compliance with the following Standards:
Regarding Hazardous Environments:
● EN 50020:2002
● EN
50014:1997 A1 + A2
● EN 60079-0:2006
● EN 60079-26:2007 Special requirements for construction, test and marking of electrical
Regarding Electromagnetic Compatibility (EMC) for Handheld Class A device
Series 4150 hand held unit compliant with EMC Directive 2004/108/EC
●
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use-EMC requirements
●
EN 60529:1991 + A1:2001: Degrees of Protection Provided by Enclosures (IP Code:IP40)
For and on behalf of
Meriam Process Technologies,
Timothy E. Lint
Standards Engineer
Meriam Process Technologies
ε
II 1 G
Χ
Li = 0, Ci = 0
Electrical apparatus for explosive gas atmospheres - Intrinsic safety 'i'
Electrical apparatus for explosive gas atmospheres - Part 0: General
requirements
Electrical apparatus for explosive gas atmospheres - General requirements
apparatus of equipment group II, Category 1 G.
Date: Oct. 30, 2009
Authorized Representative in EU:
Mr. Karl Ilg, Manager
TetraTec Instrument Gmbh
Gewerbestrabe 8
71144 Steinenbronn
Germany
Telephone: (49) 7157-5387-0
Fax:
19-1
(49) 7157-5387-10
Werbung
Inhaltsverzeichnis
