Siemens SINAMICS G120 Betriebsanleitung Seite 214

Feldbus konfigurieren
7.7 Kommunikation über CANopen
OV- Sub- Name des Objektes
Index Index
(hex) (hex)
2 Transmission type
3 Inhibit time
4 Reserved
5 Event timer
1807 Transmit PDO 8 Communication Parameter
0 Largest subindex supported
1 COB ID used by PDO
2 Transmission type
3 Inhibit time
4 Reserved
5 Event timer
Tabelle 7- 30 TPDO-Konfigurationsobjekte - Mappingparameter
OV- Sub- Name des Objektes
Index Index
(hex) (hex)
1A00 Transmit PDO 1 mapping Parameter
0 Number of mapped application Objects in PDO
1 PDO mapping for the first application object to be
mapped
2 PDO mapping for the second application object to
be mapped
3 PDO mapping for the third application object to be
mapped
4 PDO mapping for the fourth application object to
be mapped
1A01 Transmit PDO 2 mapping Parameter
0 Number of mapped application Objects in PDO
1 PDO mapping for the first application object to be
mapped
2 PDO mapping for the second application object to
be mapped
3 PDO mapping for the third application object to be
mapped
4 PDO mapping for the fourth application object to
be mapped
1A02 Transmit PDO 3 mapping Parameter
0 Number of mapped application Objects in PDO
1 PDO mapping for the first application object to be
mapped
2 PDO mapping for the second application object to
be mapped
214
SINAMICS- Daten- Predefined
Parameter typ Connection Set
p8726.1 U8 FE hex
p8726.2 U16 0
p8726.3 U8 ---
p8726.4 U16 0
U8 5
p8727.0 U32 C000 06DF hex
p8727.1 U8 FE hex
p8727.2 U16 0
p8727.3 U8 ---
p8727.4 U16 0
SINAMICS Datentyp
Parameter
U8
p8730.0 U32
p8730.1 U32
p8730.2 U32
p8730.3 U32
U8
p8731.0 U32
p8731.1 U32
p8731.2 U32
p8731.3 U32
U8
p8732.0 U32
p8732.1 U32
Umrichter mit den Control Units CU230P-2
Betriebsanleitung, 11/2013, FW V4.6.6, A5E02430659A AG
schreib-/
lesbar
r/w
r/w
r/w
r/w
r
r/w
r/w
r/w
r/w
r/w
Predefined schreib-/
Connection lesbar
Set
1 r/w
6041 hex r/w
0 r/w
0 r/w
0 r/w
2 r/w
6041 hex r/w
6044 hex r/w
0 r/w
0 r/w
0 r/w
0 r/w
0 r/w