Maintenance; Replacing The Drive Belt; Cleaning And Storing - Westfalia 15 36 27 Bedienungsanleitung

Maintenance

Always check the condition of the rotary sieve first each time before using.
Check the safety devices, switches and mains cable. Check for loose bolts
and screws, poor alignment, contacting moving parts, broken parts and
any other factors that could affect safe operation.
Do not continue to use the machine if there are any signs of damage. In
this case, have it repaired by a qualified technician or contact the Westfalia
Service Department.

Replacing the Drive Belt

Unscrew the three screws on the cover
and remove housing.
Loosen the nut at the rear side of the
housing by using a suitable open wrench
and replace the drive belt with a new one
of the same type. A spare part can be
ordered from Westfalia under the article
number 80 23 64.
Lubricate the gearwheels with clean
machine grease.
Reattach the drive belt cover on the
housing prior to use the rotary sieve again.

Cleaning and Storing

Pull the power plug before cleaning or
maintaining the rotary sieve.
Clean the rotary sieve with a hand broom.
For cleaning the motor housing use a dry
cloth.
Keep the rotary sieve dry and free from
stubborn dirt. Store the rotary sieve in a
dry and frost-free location.
Transport the rotary sieve as shown in the
picture.
Assembly and Operation
11