Spare Parts - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

Trouble-shooting
90
9.4

Spare parts

If ordering spare parts, please specify the serial number of the unit!
Housing
Certification:
A Non hazardous areas + ATEX Ex ia
B ATEX Ex d
Material:
A Aluminum, HART
B Stainless steel 316L, HART
C T17, HART
F Aluminum, FF
G Stainless steel 316L, FF
H T17, FF
Cable entry:
1
2
4
TMT162G-
Electronics
Certification:
A Non hazardous areas
B ATEX Ex ia, FM IS, CSA IS
Sensor input; communication:
A 1x; HART
B 2x; config. output sensor 1; HART
C 2x; FF Rev. 1
D 2x; PA
E 2x; FF Rev. 2
Configuration:
A
B
K
L
TMT162E-
2 x thread NPT ½" + terminal block + 1 blanking plug
2 x thread M20x1.5 + terminal block + 1 blanking plug
2 x thread G½" + terminal block + 1 blanking plug
Model:
A Standard
⇐ Order code
A
50 Hz line voltage filter
According to original order (specify serial no.) 50 Hz mains filter
60 Hz line voltage filter
According to original order (specify serial no.) 60 Hz mains filter
⇐ Order code
TMT162
T09-TMT162ZZ-09-00-xx-xx-001
Endress+Hauser