Using As Edge Trimmer - Westfalia 82 54 74 Bedienungsanleitung

Using as Edge Trimmer

1. Press the PUSH button (9) and turn the motor
housing to an angle so that the cutting line of
the blades runs parallel to the telescopic tube.
2. Pull up the locking bolt that is located above
the screw connection (8) (step 1). Hold it in
this position and turn the motor housing 90° so
that the cutting line of the blades is facing
down (step 2). Release the locking bolt.
3. Remove the set of wheels from the guide and
re-insert it turned by 90° on the guide.
4. Fold up the plant guard (11). Now you can
effortlessly cut the edges of the lawn.
2
Operating
1
Screw Connection
24
Locking Bolt