Cleaning And Maintenance - Westfalia 13 09 14 Bedienungsanleitung

from 1 – 10. Each time you change the stage you will hear a short confirma-
tion sound.
Hint: If no button is pressed within 30 seconds the unit will automatically turn
to standby mode. The ON/STANDBY control LED will turn off and you will
hear a confirmation sound. To turn on the induction hotplate again, press the
ON/STANDBY button or the HEAT button.
4. Once cooking or warming process is finished, press the ON/STANDBY button
(5). First, the icon – H – will be displayed in order to indicate that there is
residual heat. As soon as the hotplate has cooled down, the icon – L – will be
displayed.
5. If you do not use the induction hotplate for long time, disconnect the mains
plug from the wall socket.

Cleaning and Maintenance

Pull the power plug prior to cleaning the unit. Do not use any corrosive
cleaning agents or abrasives and make sure that water cannot enter the unit.
To protect yourself from electric shock, never immerse the unit, its cables and
the plug in water or other liquids.
Wipe off the casing and the operating panel with a soft cloth or a mild
detergent.
Do not use any petrol products to not damage the plastic parts and the
casing/operating panel.
Do not use any flammable, acidy or alkaline materials or substances near the
unit, as this may reduce the service life of the unit and lead to deflagration
when the unit is turned on.
Make sure that the bottom of the cookware does not scrape across the
surface of the cooking plate, although a scratched surface does not impair the
use of the unit. Please note that salt, sugar and foreign objects can damage
the surface.
Make sure that the unit was properly cleaned before storing it in a dry place.
Operation
13