Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Wear protective gloves.
Remove the battery from the device.
Help symbols with information on
improving tool handling.
Symbols on the appliance
Attention!
Remove the battery from the
device before all cleaning and
maintenance work. Risk of injury!
Read the manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Do not wear gloves while milling.
Electrical appliances must not be
disposed of with the domestic
waste.
Direction of rotation of the milling
cutter
Milling cutter fine adjustment
1mm(0.04")
This device is part of the
X 12 V TEAM series
General safety instructions
for power tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
1) Work area safety
a) Keep work area clean and well
lit. Cluttered or dark areas invite acci-
dents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
GB
MT
27
Werbung
