Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Changing the battery
A red LED light will blink when you press any
button the dimmer/switch to show that a new
battery is needed. Open the battery lid and replace
with a new AAA/HR03 battery.
Factory reset RODRET wireless dimmer
To reset and remove all connected products, quick-
press the pairing button 4 times (within 5 seconds).
Follow steps 1-3 to reconnect your smart products.
IMPORTANT!
• The steering device is for indoor use only and can
be used in temperatures ranging from
0º C to 40 ºC.
• Do not leave the steering device in direct sunlight
or near any heat source, as it may overheat.
• Different building materials and placement of the
units can affect the wireless connectivity range.
WARNING!
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according
to the instructions.
Save these instructions for future use.
Technical data
Model: TRETAKT plug smart
Type: E2204
Input: 220-240V, 50/60Hz
Max output power: 3680 W
Resistive load/ Max 300W motor load
Range: 10 m in open air.
For indoor use only
Operating frequency: 2405-2480 MHz
Output power: 10 dBm
Care instructions
To clean the product, wipe it with a soft cloth
moistened with a little mild detergent. Use another
soft, dry cloth to wipe dry. Never use abrasive
cleaners or chemical solvents as this can damage
the product.
5
Werbung
