Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When using a remote: Press the On button (|)
to turn the smart plug on. Press the Off button (o)
to turn the smart plug off.
Factory reset your smart plug:
Push the reset button on top of the smart plug
with a pointy object for at least 5 seconds until the
LED starts pulsating.
IMPORTANT!
• The Smart plug is for indoor use only and can be
used in temperatures from 0ºC to 35ºC.
• Do not leave the Smart plug in direct sunlight or
near any heat source, as it may overheat.
• Do not subject the Smart plug to wet, moist or
excessively dusty environments as this may cause
damage.
• The range between the steering device and the
receiver are measured in open air. Different
building materials and placement of the units can
affect the wireless connectivity range.
4
WARNING:
• Do not connect after each other in sequence.
• Do not cover when in use.
• To disconnect the power, pull the plug.
• Use only indoors in dry areas.
• Do not overload the product.
• Discard the product if damaged.
• For adult use only. This is not a toy and is not
intended for use by children.
Product servicing
Do not attempt to repair this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks.
Get to know your RODRET product
Pairing button
Press to turn on, or long-press to increase
brightness
Press to turn off, or long-press to decrease
brightness
Werbung
