Werbung
Connecting Devices with FRITZ!Repeater
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Connecting Devices with the Wireless Radio Network
Overview
Laptops, smartphones and other wireless devices can be connected
with the wireless radio network of the FRITZ!Repeater in two ways: Via
WPS or by entering the wireless network key.
WPS (Wi-Fi Protected Setup) is a feature with which you can establish
secure wireless LAN connections quickly and securely at the touch of a
button.
Requirements
•
Rules
•
Instructions: Connecting to an Android Device with WPS
All Android versions support WPS up to and including Android 8.0.
1.
2.
3.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Repeater 600
For wireless connections with WPS: The wireless device supports
WPS.
The following instructions assume that the FRITZ!Repeater
adopted the wireless network name (SSID) and the wireless
network key from the router (FRITZ!Box). If you configured other
wireless LAN settings in the FRITZ!Repeater, then use the settings
of the FRITZ!Repeater to establish wireless connections.
On the Android device: Search for WPS in the settings. You can
find WPS by using the search function in the settings, or under
"Wi-Fi / Advanced".
Start connecting with WPS. Use the push button method (also
called "Press WPS Button", "PBC", or "Push Button
Configuration").
On FRITZ!Repeater: Press the "Connect" button.
The
LED starts to flash. The wireless connection has been
established when the LED lights up.
31
Werbung
