Werbung
Connecting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5.
6.
7.
8.
9.
10. Wait until the
11. Insert the FRITZ!Repeater into an electrical outlet where the
12. A green LED indicates that the FRITZ!Repeater is positioned in a
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Repeater 600
Enter a password for the user interface.
We recommend leaving the AVM services for diagnostics and
maintenance of the FRITZ!Repeater enabled. You can change
this setting at any time.
Click on "OK".
Enable the connection type "Wireless bridge" and click on
"Next".
Select the radio network of your router and click on "Next".
Enter your network key for the router's wireless network, and
click on "Next" and then on "Finish".
LED on the FRITZ!Repeater lights up.
The wireless connection to the FRITZ!Box is established.
wireless radio network is to be expanded.
The distance from the wireless router should be about the same
as the distance from the wireless devices for which the radio
network is being expanded.
The FRITZ!Repeater starts and reconnects to the FRITZ!Box (LED
flashes). A steady green LED indicates that the connection has
been established.
good location.
If the LED is orange or flashing orange, then the wireless
connection to the wireless router is weak or could not be estab
lished. Test other outlets;
FRITZ!Repeater, page
Connect
see Finding the Ideal Location for
23.
22
Werbung
