Malfunctions
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Troubleshooting Chart
Error Scenario
A wireless LAN
connection to
the FRITZ!Box
cannot be estab
lished.
A wireless LAN
connection to
another wire
less router
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Repeater 600
Cause
Solution
Keylock of the
Disable the keylock in the user
FRITZ!Box
interface of the FRITZ!Box
enabled.
(http://fritz.box) under "System /
Buttons and LEDs".
WPS is switched
Enable the settings "WPS
off in FRITZ!Box.
enabled" and "Push-Button
method (WPS-PBC)" in the
FRITZ!Box.
The MAC
Enable the "Allow all new wireless
address filter of
devices" setting in the FRITZ!Box.
the FRITZ!Box is
This setting is located under
enabled.
"Wireless / Security" or "Wireless
/ Radio Network" in the user inter
face (http://fritz.box). The
Advanced view must be enabled in
the user interface.
WPS is switched
Enable the settings "WPS
off in FRITZ!Box.
enabled" and "Push-Button
method (WPS-PBC)" in the
FRITZ!Box.
You can find the settings in the
user interface (http://fritz.box)
under "Wireless / Security / WPS
Quick Connection".
WPS is switched
Enable WPS in the wireless
off in the wire
router. Instructions are provided
less router.
by the manufacturer, for instance,
in the device manual.
66