Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MAINTENANCE
CLEANING
THE
STYLUS
x
If dust or dirt is allowed
to collect on the stylus, it not only
Side B
SED
Or
Side A
causes distortion, but also can lead to damage of the stylus or
Sh
A
cartridge
record. The stylus should be cleaned
in the following manner:
u Using a screwdriver,
remove
the two
covers
(right and left)
on the sides of the unit.
93 Clean off dust and dirt by brushing
in the direction of the
arrow
(see illustration) with a commercially available stylus
cieaning brush.
§3 Return the covers and re-fasten them.
oe
wo
-
STYLUS
REPLACEMENT
worn
stylus results
in sound
distortion
as well as damage to
records.
Stylus replacement should be done promptly.
@Stylus
assembly
STY-133
is available
at SHARP
dealers
or
service centres.
@ Do not apply undue, force to the tonearm when replacing
the stylus.
® Be careful-not to drop the stylus into the interna! mechan-
| Remove the covers from both sides of the unit.
Stylus
GE (STY-133)
we
%
10
Werbung
