Werbung
Pre-Charge Methods
1. From a Battery
Connect the unit to a battery and press ON/OFF (4),
the jump starter will be fully recharged within
150 seconds.
2. From USB
The jump starter can be recharged from any
5 V
will take 40 minutes to be fully recharged. Just con-
nect the unit to the USB port, charging starts auto-
matically.
3. From a 12 V socket
The jump starter can be recharged from a donator
car's 12 V socket. Just plug in the 12 V adapter (8)
and connect it to the charging socket (3). Charging
starts automatically. It will take about 200 seconds.
Cleaning and Storing
Before undertaking any cleaning or storing the
charger, unplug the unit.
Clean the unit only with a moist cloth and allow it to
dry completely before using it again.
In no case use abrasives or aggressive chemicals.
Store the unit indoors in a dry place that is protected
from extreme temperatures.
Regularly clean the battery clamps.
Operation
2 A USB port via the micro USB port (2). It
19
Werbung
