Werbung
Verfügbare Sprachen
Verfügbare Sprachen
▪
Front screen
(2): put your finger or a blunt object in
the recess and carefully lever the windshield out of the
holders.
Sieve the new disk into the mounts until it snaps into
place.
▪
Dark pane
(3): fold out the flip-up Visor (5). Turn the
helmet over so you're looking at the inside of the flip-up compartment.
Unlock the metal retaining bracket (6) (recess: press and tilt upwards at the
same time). Push the 4 retaining lugs (2 on each side) to the side and take
out the pane.
Click the new pane into the 4 retaining lugs and press the metal retaining
bracket down again.
▪
Inner cover panel
your hand. Carefully pull the pane downwards out of the retaining clips, as
with the front pane (2).
Slide the new disc into the brackets until it clicks into place.
Washing the sweatband (8)
Carefully detach the sweatband (8) from the retaining lugs. Fasten the washed
sweatband (8) carefully and horizontally in the retaining lugs using the holes
provided. Flip it over and fasten the other side in the same way.
Wash the sweatband (8) under lukewarm water and let it dry thoroughly.
Spare parts
(2,3
Art. 600863
Technical Data
Operating temperature:
Storage:
Weight:
Field of view (L x W):
Blackout level:
(4): carefully press against the panel from the inside with
and 4)
3 pcs. Replacement disc set
-5 °C - +55 °C
-20 °C - +70 °C
approx. 487 g
110,5 x 93 mm
11
12
Werbung
