Installing The Hedge/Shrub Blade; Installing The Grass Shear Blade - Westfalia 87 28 47 Bedienungsanleitung

Installing the Hedge/Shrub Blade

Bottom Blade
Hole
Locking Hole
Move the upper blade of the hedge/shrub blade so that the
middle line of the plastic ring is positioned exactly in the
centre of the hole.
5. Place the four locking holes of the hedge/shrub blade onto the
four locking pins on the gear carriage. Make sure the cam of
the gear wheel completely snaps into the plastic ring.

Installing the Grass Shear Blade

Bottom Blade
Hole
Middle Line
Locking Hole
6. Turn the gear wheel so that the middle line of the marking rib
on the gear wheel is positioned exactly leftwards.
Operation
Middle Line
Upper Blade
Plastic Ring
Upper Blade
Plastic Ring
23
Locking Pin Gear Wheel
Marking Rib