Inhaltsverzeichnis
Werbung
To unlock and remove the handle
from the motor unit, depress the
release button (8) on both sides
of the handle and pull out the
handle.
Mounting the Telescopic Handle
For using the telescopic handle (14), connect the handle, the
telescopic handle and the motor unit together. Make sure that all
components are securely attached.
Adjusting the vertical Working Position
Warning!
The vertical adjusting
function can only be
used together with the
telescopic handle!
When
the
telescopic
handle is not mounted,
do not use this function.
Make sure the position
of the blade bar is at 0°
when not using the
telescopic handle!
1. Press the release
button PUSH (9) to adjust the desired angle setting of the motor
housing.
Operation
25
8
20°
20°
Werbung
Inhaltsverzeichnis
