Inhaltsverzeichnis
Werbung
2. Use the wheel assy when trimming grass over the ground.
Hold the handle of the grass and hedge shear firmly in your
hand and do not force the grass and hedge shear while
trimming.
3. To remove the wheel assy, hold the handle of the grass and
hedge shear firmly in one hand and jerky pull the wheel assy
out of the unit.
Using the Telescope Tube (Optional)
1. To extend the telescope tube, turn the screw joint counter
clockwise and pull the handle out of the tube. For fastening
the tube, turn the screw joint clockwise.
2. Insert the telescope tube into the provided connection on the
wheel assy and adjust the desired height. The telescope tube
fits at an arc radius of 360° into 8 different positions in the
grass and hedge shear. When inserting the telescope tube
make sure to push the tube as far as it will go, so the small
pin, situated close to the release button (10), completely
disappears in the wheel assy connection. The tube has to lock
audible.
3. To turn on the grass and hedge shear, first press the safety
switch (4) and then the ON/OFF switch (3) on the telescope
handle. Please note that the ON/OFF switch of the grass and
hedge shear is out of order while the telescope tube is in-
serted.
4. To remove the telescope tube, first press the release button
(10) and pull the tube out of the wheel assy.
Operation
25
Werbung
Inhaltsverzeichnis
