ASROCK Z77M Bedienungsanleitung Seite 21

All manuals and user guides at all-guides.com
2.7.2 Driver Installation and Setup
Step 1. Power on your computer and boot into OS.
Step 2. Remove the AMD drivers if you have any VGA drivers installed in your
system.
The Catalyst Uninstaller is an optional download. We recommend using this
utility to uninstall any previously installed Catalyst drivers prior to installation.
Please check AMD's website for AMD driver updates.
Step 3. Install the required drivers to your system.
®
For Windows XP OS:
A. AMD recommends Windows
installed (If you have Windows
in your system, there is no need to download it again):
http://www.microsoft.com/windowsxp/sp2/default.mspx
B. You must have Microsoft .NET Framework installed prior to
downloading and installing the CATALYST Control Center. Please
check Microsoft's website for details.
®
For Windows 7 / Vista
Install the CATALYST Control Center. Please check AMD's website for de-
tails.
Step 4. Restart your computer.
Step 5. Install the VGA card drivers to your system, and restart your computer.
You will fi nd "AMD Catalyst Control Center" on your Windows
AMD Catalyst Control Center
Step 6. Double-click "ATI Catalyst Control Center". Click "View", select "CrossFi-
TM
reX ", and then check the item "Enable CrossFireX
and click "Apply".
ASRock Z77M Motherboard
®
XP Service Pack 2 or higher to be
®
XP Service Pack 2 or higher installed
TM
OS:
TM
". Select "2 GPUs"
®
taskbar.
21