Herunterladen Diese Seite drucken
Wisi PROSWITCH DY 1708 Betriebsanleitung
Wisi PROSWITCH DY 1708 Betriebsanleitung

Wisi PROSWITCH DY 1708 Betriebsanleitung

Werbung

WISI PROSWITCH
DY 1708 / DY 1716
Multischalter 17 in x, Kaskade & Stand Alone
• Kaskadierbarer Multischalter zur
Verteilung von 16 SAT-Polarisationsebenen
und terrestrischen Signalen
• Als Stand alone Geräte verwendbar
(DY 70 Netzteil notwendig)
• Standby-Funktion bei angeschlossenem
Netzteil, wahlweiße auch Dauerbetrieb
• Passiver terrestrischer Zweig zur Einspei-
sung von Multimedialen-Diensten oder
Signalen aus Gemeinschaftsanlagen
• Integrierter SAT-Verstärker für geringe
Anschlussdämpfung
• Vorentzerrung zur Kompensation der
Kabelschräglage
• Hohes Schirmungsmaß der Klasse A
• Stapelbares Gehäuse zur platzsparenden
Installation mehrerer Geräte
• Farbcodierte Eingänge und Ausgänge
© WISI Communications GmbH & Co. KG
WISI PROSWITCH
DY 1708 / DY 1716
Multiswitch 17 in x, cascade & stand alone
• Cascadable multiswitch for the
distribution of 16 satellite polarisations
and terrestrial signals
• Useable as a stand alone device
(DY 70 power supply required)
• Stand-by function with connected power
supply, optional permanent operation
• Passive terrestrial path to distribute
DVB-T/T2, DAB and FM without an
additional amplifier
• Integrated SAT amplifier for low insertion
loss
• Pre-emphasis to compensate the cable loss
at high frequencies
• High screening efficiency according to
Class A
• Stackable chassis for space-saving
installation of various devices
• Colour-coded inputs and outputs
416 537 b
Betriebsanleitung
Operating manual
www.wisi.de

Werbung

loading

Inhaltszusammenfassung für Wisi PROSWITCH DY 1708

  • Seite 1 • Stapelbares Gehäuse zur platzsparenden Class A Installation mehrerer Geräte • Stackable chassis for space-saving • Farbcodierte Eingänge und Ausgänge installation of various devices • Colour-coded inputs and outputs © WISI Communications GmbH & Co. KG www.wisi.de 416 537 b...
  • Seite 2 Dabei sind ggf. DC-Trennungen zu berücksichtigen, Not used cascade-outputs has to be equipped with um Versorgungskonflikte zu vermeiden. DC-blocked terminating 75 Ohm resistors. Die Kaskadenausgänge sollten bei Nichtbenutzung generell mit DC-getrennten 75 Ohm Abschlusswiderständen versehen werden. © WISI Communications GmbH & Co. KG...
  • Seite 3 Farbcodierung: Colour-coding: VL = Schwarz VL = black HL = Grün HL = green VH = Rot VH = red HH = Gelb HH = yellow DC- getrennte Abschlusswiderstände (DV 25) DC blocked terminating resistor (DV 25) www.wisi.de...
  • Seite 4 Dimensions (width x height x depth) WISI Communications GmbH & Co. KG Empfangs- und Verteiltechnik Wilhelm-Sihn-Strasse 5-7 Inland: Phone +49 7233-66-0 Fax -320 75223 Niefern-Öschelbronn Export: Phone +49 7233-66-0 Fax -350 Germany Email: info@wisi.de © WISI Communications GmbH & Co. KG www.wisi.de...

Diese Anleitung auch für:

Proswitch dy 1716