Master&Dynamic MW75 Benutzerhandbuch Seite 7

POWER ON + CHARGE
EN
Press Power/Pairing button once to power ON/OFF.
Battery level will be displayed at startup.
To charge, connect MW75 to a power source with the USB-C to USB-C cable.
The USB-C to USB-C cable will engage digital USB (wired) audio if connected to
a compatible device.
The headphones will only play while charging if:
1. The headphones are already connected to a device via Bluetooth
before being plugged into the power source.
OR
2. The headphones are connected to a computer or supported device via a USB-C
to USB-C (digital wired audio) connection. This will be the default unless already
connected to Bluetooth when plugged in.
POWER/PAIRING INDICATOR LIGHT
POWER/ PAIRING BUTTON
Power ON/OFF
BATTERY INDICATOR LIGHT
At startup battery status is displayed:
High Med
USB-C CHARGING PORT
Charge via USB-C connector
Low
7
® and playing content