Werbung
Verfügbare Sprachen
Verfügbare Sprachen
STEP 6
• Place the display holder on the handlebar and secure it with the self-tapping screw (24)
• Mount the display on the display holder.
• Insert the pulse lead (22) into the „pulse" hole on the back of the display (9).
• Insert the transmitter wire (23) into the „sensor" hole on the back of the display (9).
STEP 7
• Mount the mobile phone holder (11) on the handlebar (6).
• WARNING: Before use, check that all components are properly secured and that the bicycle
is stable on the ground.
Werbung
