Mc Haus artic-40 Bedienungsanleitung Seite 40

ASSEMBLY
PLACE OF ASSEMBLY
Carry out the installation in a flat and dry place, 50cm should be left
free around the device to allow a regular air circulation, as shown in
Fig. 1 (before connecting the exhaust pipe).
EXHAUST PIPE ASSEMBLY
2
MOUNTING THE WINDOW SEAL PLATE
Insert the air exhaust duct into the window sealing plate, adjust
the width of the window opening so that the window can coincide
with the sealing plate correctly; the length of the sealing plate is
adjustable (Fig. 3).
WARNING! Incorrect installation will affect the
work of the air conditioner.
Prevent the exhaust duct from bending seriously.
Make sure that air can flow smoothly in the duct.
Mc HAUS
Connect the exhaust pipe connector and the window kit adapter to each end of
the exhaust pipe. Then connect the connector to the appliance Fig. 2.
WARNING! The maximum length of the exhaust pipe is 1500 mm. We recommend
using the minimum length to save energy.
The length of the exhaust pipe is specially designed according to the
specifications of the air conditioner. Please do not use other exhaust pipes of
different length or materials, it may cause a breakdown.
artic-40
1
3