To Select Double Height Text; To Reveal "Concealed" Information; To Stop Automatic Page Change; To Select A Subcode - Superior 10000554 Bedienungsanleitung

TELETExT / TIPS
teletext page will appear on top screen and will
remain there until the requested page is found. Then
teletext line will be replaced by page number to
indicate that page has been found. Now you can
display this teletext page pressing "

To Select Double height Text

• Press " " button for the top half of the informati-
on page to be displayed in double height text.
• Press " " button again for the bottom half of the
information page to be displayed in double height text.
• Press " " button once more for the full page of
normal height text.

To Reveal "concealed" Information

• Pressing " " button once will reveal answers on
a quiz or games page.
• Pressing " " button again will conceal the reve-
aled answers.

To Stop Automatic Page change

The teletext page you have selected may contain more
information than what is on the screen; the rest of the
information will be displayed after a period of time.
• Press " " button to stop the automatic page change.
• Press " " button again to allow the next page to
be displayed.
To Select a Subcode Page
Subcode pages are subsections of long Teletext pages
that can only be displayed on the screen one section
at a time.
• Select the required Teletext page.
• Press " " button.
• Select the required subcode page number by
pressing four digit buttons (e.g. 0001).
• If the selected subcode page is not displayed in a
short time, press "
be displayed on the screen.
• Teletext page number will be displayed on the up-
per left corner of the screen when the selected page
is found.
• Press " " button to display the selected Teletext
page.
" button.
" button. TV programme will

Fastext

Your TV supports the 7 page Teletext system. When
the page number of any of the 7 pages in memory is
entered, the system will not search for the requested
page; instead it will display the page automatically.
• Press button to move the Teletext screen
"G P"
forward one page at a time.
• Press button to move the Teletext screen
"P H"
backward one page at a time.
For Fastext
The subject-heading for the information may have a
particular colour.
• Press an appropriate RED, GREEN, YELLOW or
BLUE button in order to reach the relevant page
quickly.

To exit Teletext

• Press "TV" button. The screen will switch to TV mode.

To Display the Time

• While watching a TV programme with Teletext
transmission press "
information, captured from Teletext will be
displayed at the upper middle of the screen.
• If the programme being watched does not have Te-
letext transmission, no information will be displayed.

TIPS

care of the Screen

Clean the screen with a slightly damp, soft cloth.
Do not use abrasive solvents as they may damage the
TV screen coating layer

Poor Picture

Have you selected the correct TV system? Is your TV set
or house aerial located too close to the loudspeakers,
non-earthed audio equipment or neon lights, etc. ?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
Is the picture or Teletext unrecognisable? Check if you
have entered the correct frequency.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.

No Picture

Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial
5
"button. The current time
GB