Menu System; Sound Menu; Setting Volume - Superior 10000554 Bedienungsanleitung

MENU SYSTEM

The short way in order to enter the menus, press :
"M" Button
Red Button
Green Button
Yellow Button
Blue Button
"INFo" Button
Menu button has two functions; first is opening or clo-
sing the „MAIN MENU", and the second is closing the
sub-menu and then opening its parent menu.

Sound Menu

To change sound settings
• Enter the Sound Menu directly, pressing the Red
button or,
• As you enter the main menu, sound will be the first
selected option. In the main menu, select SOUND
using or "P H"
"G P"
menu pressing or
"F"

Setting volume:

As you enter the sound menu, Volume will be the first
selected option.
• Press button to increase volume.
"E"
• Press button to decrease volume.
"F"
Or you can directly change the volume settings using
"V+" (to increase) or "-V" (to decrease) button.
Setting Balance
It allows adjusting the distribution between the left and
right speakers.
• Using or
"P H"
"G P"
• Press button to change balance rightward.
"E"
• Press button to change balance leftward.
"F"
When balance control is in mid position, the cursor is
displayed with the two reciprocal arrows.
Main Menu
Sound Menu
Picture Menu
Feature Menu
Install Menu
Programme Menu
button, then enter the sound
button.
"E"
button select Balance.
Selecting Mode
• Using or
"P H"
"G P"
• Press or
"F" "E"
You can choose MONO, STEREO or DUAL
(I-II) mode, only if the selected channel
supports that mode.
You can also change sound mode directly pressing
"I-II" button on your remote control.
In case of bilingual broadcast (Dual Sound), you can
select original or dubbed language using mode option.
Setting AvL
Automatic Volume Limiting (AVL) function normalises
sound to obtain fixed output level between programs,
having different sound levels. Pressing
button will turn on and off this feature.
Setting Effect
You can use this feature to switch the sound effect on
and off. Pressing
"F"
off this feature. If the current sound system is MONO
and the sound effect is set ON, then the sound will be
heard as if it is STEREO. If the current sound system is
STEREO, switching this effect on will make the sound
deeper. Switching it off will make no change in MONO
and STEREO.
Equalizer
To enter Equalizer sub-menu, select Equalizer using
or "P H" button, then enter Equalizer menu
"G P"
pressing or
"F" "E"
In MODE item there are five predefined and one user
defined options. These are USER, FLAT, POP, ROCK,
JAZZ and CLASSIC. The predefined options can not
be changed by the user. If you change one of the
frequency values of the predefined options, the MODE
is switched automatically to USER option. The USER
option may be adjusted by the user.
The 5 items below the MODE are available to adjust
the sound settings in 5 frequency values: 120 Hz, 500
Hz, 1.5 kHz, 5 kHz and 10 kHz. To change the values
of 5 frequency options, select one of the options by
or button, and then press
"P H"
"G P"
48
button select Mode.
button to change Mode.
or
"F"
or button will turn on and
"E"
button.
to increase
"E"
"E"