Swann SWIFI-2KOCAM Schnellstartanleitung Seite 3

1
Connect the camera to the port labelled "CAM" on the bottom of the Power over Ethernet (PoE)
adapter using the supplied Ethernet cable.
2
Attach the appropriate plug adapter to the PoE adapter then plug the PoE adapter into an indoor
power outlet. Make sure the camera is within range of the Wi-Fi network to which you want to
connect.
Ethernet connector
(Optional waterproof connector kit supplied,
see page 8 for installation instructions)
CONNECT THE CAMERA
Select adapter that corresponds to
your country. To attach, place adapter
on the prongs and slide down until it
clicks into place on the PoE adapter.
To remove, press the "PUSH" button
and slide adapter out.
Ethernet cable
PoE Adapter (Indoor use only)
(Optional) The LAN port
provides the option of a wired
connection to your router as
backup (when Wi-Fi network
is unstable). Camera must
first be paired to your Wi-Fi
network via app. Remove
yellow sticker before use.
Ethernet cable to router (not supplied)
WAN LAN1 LAN2 LAN3 LAN4
EN
3