ONFORU ON-GY03-RGBW-US-3 Bedienungsanleitung Seite 9

3. Tap the confirmation button to
pair the Bulb.
Please Note:
a. This smart LED bulb can only support 2.4 GHz network and cannot work with 5.0 GHz
b. network.
Please check if your home network is 2.4 GHz and make sure that your phone has been
connected to your Wi-Fi network. Please ensure your network is not hidden.
5. Wait till it is successfully connected
Note: If the bulb is still flashing until the progress map reaches 100%, the pairing fails, and you
will need to repeat the previous 4 steps to pair the Bulb.
4. Enter Wi-Fi password to join your network.
7
English