ONFORU DT5UV Installationsanleitung

THANK YOU for buying this product. To provide an excellent
user experience, please install it according to these
instructions.
SAFETY INFORMATION
1.Disconnect the power supply before attempting any work on the unit！
2.Check all components for damage, do not use the product if it is
damaged.
3.To ensure the product can work normally, please use it in the voltage
within the range on the lamp label.
4.Do not install the unit on (normally) flammable surfaces.
5.The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced.
6.This light is a non-dimmable product.To avoid failure, please don't
connect it with the dimming controller.
7.Please pay attention to anti-static during the installation and use of the
product. Don't touch the product with sharp tools
8.Never plug the light in with wet hands in case of electric shock.
9.This product is not a toy. Do not let children play it as the toy.
10.The 3M adhesive might be used during the installation, please make
sure it is applied firmly to prevent the product from falling.
11.This product is used for decoration, not suitable for lighting
12.To reduce the risk of strangulation the flexible wiring connected to
this luminaire shall be effectively fixed to the wall if the wiring is within
arm's reach.
INSTALLATION GUIDE
12V UV LED Strip Light
1
English