Technical Specifications - cecotec BOLERO COOLMARKET 4D 490 INOX E Bedienungsanleitung

ENGLISH
Condensation droplets
When outside air enters the cold inner surface of the refrigerator, condensation droplets may
appear. If it's rainy season or humidity at the place of installation is high, condensation droplets
may appear on the outside of the refrigerator. This is a natural phenomenon that occurs in wet
weather. Wipe off the water droplets with a dry cloth.
Noise
- When the refrigerator is switched on for the first time, it will run at high speed to cool down
quickly and may emit a louder sound. When the internal temperature drops below a certain
level, the noise will decrease.
- When the refrigerator is switched on or off, when various parts expand or contract, when
various control devices are running, or when the temperature inside the refrigerator
changes, you will hear noises. This is normal.
The refrigerator heats up
During operation, the temperature of the condenser is above 80 ºC–do not touch it to avoid
serious injury.
The refrigerator takes a long time to cool down
If room temperature is too high or you put too much fresh food in the refrigerator, it will take a
long time to bring the temperature down to the set values.
See the list below before contacting the official Technical Support Service. The list includes
common occurrences that are not the result of faulty workmanship or materials in this
appliance.
Fault Possible causes
Nothing showed on The plug of the appliance is not
the display. properly inserted in the socket.
The mains fuse is switched off.
Sounding alarm. Door is slightly open or has not
been closed for more than 1
minute.
The refrigerator Defrost mode enabled.
does not work. The power supply is not
connected properly.
B O LE R O COOLM ARKET 4D 49 0 INOX/ DAR K/GL ASS E
72
Possible solutions
Correctly connect the plug to the
socket.
Check for power: the fuse must be
connected.
Close the door completely.
This is normal if defrosting.
Check if the power supply is
connected properly.
The refrigerator The refrigerator has recently
takes a long time to been switched off for a period
cool down. of time.
You have put in too much fresh
or hot food.
Doors are opened too often or
for too long.
Vibration. The ground is uneven or weak.
Vibration comes from
objects placed on top of the
refrigerator.
The refrigerator touches the
wall or a piece of furniture.
Note:
If none of these situations match your problem, do not attempt to disassemble or repair the
device by yourself. Repairs carried out by unqualified persons may result in injury or serious
malfunctions. Please contact the local store where you made your purchase. The repair must
be carried out by an authorised technician, and you must use only original spare parts.

7. TECHNICAL SPECIFICATIONS

Product Bolero CoolMarket 4D
490 Inox E
Reference: 02455
QR code
Voltage 220-240 V~
BO LERO COOLMARKET 4 D 490 IN OX/DARK/GLAS S E
ENGLISH
The refrigerator takes a few hours
to cool down completely.
Hot food causes the refrigerator
to take longer to reach the desired
temperature.
Warm air entering the refrigerator
has the same effect. Do not open
the door too often.
Make sure that the floor is level,
solid, and can support the weight
of the refrigerator.
Remove the objects.
Move the refrigerator so that
it does not touch the wall or
furniture.
Bolero CoolMarket 4D Bolero CoolMarket 4D
490 Dark E 490 Glass E
02456 02457
73