Managing Incoming Calls; Making An Outgoing Call - MAC Audio MAC 520 DAB Bedienungsanleitung

7. Touch the "Scan" icon on the unit's Bluetooth® user interface screen. Available devices will
appear with the "Pair" icon next to it.
8. Touch the "Pair" icon on the unit's Bluetooth® user interface screen.
9. A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate
the process.
NOTE: Some mobile phones require a "pass key" or pairing code to connect. If your
phone requires a pass key or pairing code, you will need to enter this number.
The default pairing code for many mobile phones is "0000". The default code for
the unit is "0000".
10. A prompt to enter a PIN number or passkey for the unit should appear. The default passkey for
the unit is "0000".
11. At this point a prompt stating pairing successful should appear. Another prompt should appear
asking connect to the unit, Yes or NO. Touch Yes. The mobile phone and the unit should
connect. The mobile phone should display a message similar to "Device Connected" and the
mobile phone and the unit are now connected. MAC 520 DAB will appear on the mobile phone
list of devices.

Managing Incoming Calls

When connected to a Bluetooth® mobile phone, the unit will mute audio output, pause CD play,
and change to the Bluetooth® screen below when a call is received. The incoming phone number
or assigned name for that number will appear on the screen. An audible tone will sound from the
unit and a graphic display will appear on the front panel.
1. icon: Touch to answer an incoming call.
2. icon: Touch to end an incoming call.

Making an Outgoing Call

Outgoing calls can be performed in two manners. The outgoing call can be direct dialed using the
front panel keypad or by touching either the Phonebook or Call History icons, selecting a name
and touching the phone number.
Bluetooth Incoming Call Screen
91