Electromagnetic Compatibility Descriptions; Descripciones De Compatibilidad Electromagnética; Beschreibung Der Elektromagnetischen Kompatibilität; Descriptions De Compatibilité Électromagnétique - Med-fit Painless TENS Benutzerhandbuch

ELECTROMAGNETIC COMPATIBILITY
DESCRIPTIONS
This product needs special precautions regarding EMC and needs to be installed and put into service according
to the EMC information provided, and this unit can be affected by portable and mobile RF communications equipment.
1) Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect
operation of the unit.
2) Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation!
3) Caution: This machine should not be used adjacent to or stacked with other equipment and that if adjacent or stacked
use is necessary, this machine should be observed to verify normal operation in the configuration in which it will be
used.
Guidance and manufacturer's declaration – electromagnetic
emission – for all EQUIPMENT AND SYSTEMS
Guidance and manufacturer's declaration – electromagnetic emission
The DEVICE is intended for use in the electromagnetic environment specified below.
The customer or the user of DEVICE should assure that it is used in such an environment.
Emissions test Compliance
RF emissions
Group 1
CISPR 11
Electromagnetic environment - guidance
The DEVICE uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
91