Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
RF-TD-100
8-in-1 Portable Tablet Docking Station with Stand
Item No. 2614583
1 Intended use
This USB-C
docking station is a multiport adapter designed with seven ports to expand the
®
limited connectivity of your portable USB-C
one built-in smartphone/tablet stand. The product is suitable for USB-C
tablets, or laptops that support DisplayPort Alt Mode (DP Alt Mode) and USB-C
(PD) for video output and fast charging. The HDMI port of the product supports Ultra HD 4K
(3840 x 2160 pixels at 30 Hz) high-resolution video output to mirror or extend your desktop
to an external monitor, TV, or projector. Plug-and-play, no need to manually install software/
drivers.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
USB4
, USB Type-C
and USB-C
are registered trademarks of USB Implementers Forum.
®
®
®
2 Delivery content
Tablet docking station with built-in stand
USB-C
to USB-C
cable (43.5 cm)
®
®
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric
shock.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
5.3 Operating environment
Do not place the product under any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, steam and
solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
devices, one USB-C
PD charging input port, and
®
®
enabled smartphones,
®
Power Delivery
®
Operating instructions
www.conrad.com/downloads
or scan the QR code
5.4 Operation
If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can
no longer be guaranteed if the product is visibly damaged, is no longer working properly,
has been stored for extended periods in poor ambient conditions, or has been subjected to
any serious transport-related stresses.
5.5 Connected devices
Also observe the safety and operating instructions of any other devices which are
connected to the product.
6 Product overview
1
2
3
1
USB-C
PD charging input port
®
(max. 20 V/DC, 5 A, 100 W)
Connect a suitable power supply to
charge the host device. This port only
supports charging input, it does not
support data transfer.
2
HDMI port (output)
To connect HDMI monitors, TVs, or
projectors.
3
USB-A (3.0) port x 2
To connect supported USB storage
devices, mouse, keyboard, webcam, or
other USB devices.
4
3.5 mm audio jack (input/output)
To connect speakers, headphones,
headsets, or microphone.
7 Setup
1. Unpack and remove any protective film from the product.
2. Place the product on a table that is level, stable and dry.
3. Adjust the stand to a suitable angle, and place your smartphone or tablet on the bracket
holders. Do not place other larger devices on the product to avoid damage.
8 Operation
Make sure the host device supports DisplayPort Alt Mode (DP Alt Mode) over USB-C
transfer video. If the host device does not support DP Alt Mode, video output will not be
available from the HDMI port of the product.
(3.0) PD port (5) on the product to the USB-C
1. Connect the USB-C
®
smartphone, tablet, or laptop (host) using the USB-C
2. Connect the HDMI output port (2) on the product to a monitor, TV, or projector.
3. Connect your peripheral devices to the other ports on the product as needed.
4. To charge your host device with high-speed charging while it is connected to the product,
PD charging input port (1) on the back of the product to a USB-C
connect the USB-C
®
PD cable and PD charger (both not included) plugged into a mains outlet. Do not connect
other devices to this port.
When your host device supplies power to peripheral devices, it is recommended to
connect the product to a suitable USB power supply to provide power to both your
device and peripheral devices.
5. To insert an SD or microSD card into the corresponding slot (6 or 7) on the product, follow
the correct side of the card as illustrated below. Do not force memory cards into the slots
to avoid damage.
Before inserting a storage device into the product, always backup your files to protect
them from damage or loss. Do not remove storage devices when the host device is
reading or writing data to avoid losing data.
6. Disconnect the product from the USB power supply when the host device is fully charged,
or when the product is not in use or unattended.
7
3
4
5
6
5
USB-C
(3.0) PD port (host
®
connection)
To connect a USB-C
PD and DP Alt
®
Mode enabled smartphone, tablet, or
laptop to the product.
6
SD card slot
To read and write data on supported
SD cards.
7
microSD card slot
To read and write data on supported
microSD cards.
8
USB-C
to USB-C
cable (43.5 cm)
®
®
To connect the host device to the
(3.0) PD port (5).
USB-C
®
®
cable (8) (included).
®
8
to
®
port on your
®
Werbung
Inhaltsverzeichnis
