Overdrive; Boost; Looper; Recording And Playback - Rocktile MRC-90-LOOP Bedienungsanleitung

OVERDRIVE

The MRC-90-LOOP has an analog OVERDRIVE, which is based on the famous
original from Japan.
The GAIN control adjusts the amount of distortion.
TONE is responsible for the tone control of the OVERDRIVE effect.
LEVEL adjusts the output signal level of the effect.

BOOST

The MRC-90-LOOP has a module for BOOST and SOUND CONTROL. The analog
effect can provide up to +15dB signal strength boost.
Use the toggle switch BOOST to activate the BOOST module.
The GAIN control adjusts the signal boost.
BASS and TREBLE are used to control the tone.
LEVEL adjusts the output signal level of the effect.

LOOPER

The MRC-90-LOOP has a LOOPER with 9 LOOP phrases with a maximum storage
capacity of 10min. The basic functions of the LOOPER can all be operated by the
foot switch (5).
The signal strength of the played LOOPER signal can be adjusted with the VOLUME
knob.
When the VOLUME knob is lit in red, this indicates that there is already music data
on the selected LOOP phrase.
The following actions apply when the LOOP phrase is empty:

Recording and playback

Step Action
1 Click on LOOP button
2 Click on LOOP button
3 Click on LOOP button
4 Click on LOOP button
etc.
x Double click on LOOP
button
X+1 Click on LOOP button
Display
A red LED at the top
left
Blue LEDs running
Red LEDs running
Blue LEDs running
No LEDs
Blue LEDs running
8
Function
Recording
Playback of the
first recording
Additional
recording
Playback of both
recordings
PAUSE
Playback of all
recordings