Care And Maintenance; Battery Safety Instructions - Levenhuk Ermenrich Wett MW40 Bedienungsanleitung

Note!
If the wood of the measured sample is not listed in the table above, use the following equation to calculate the absolute dry density.
Density = (100 x weight / volume) / (100 + moisture content of the wood)
Weight unit of measurement: gram
Volume unit of measurement: cm³
Select grade "1" for densities below 0.25g/cm³.
Specifications
Type
Resolution
Measurement accuracy
Measuring range
Operating temperature range
Operating humidity range
Auto-off
Power supply
Dimensions
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Use the device only as specified in the user manual. Keep away from children. Do not try to disassemble the device on your own for any
reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact
and excessive mechanical force. Do not use the product in explosive environment, close to flammable materials. Store the device in a dry
cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate
a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention
immediately.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment
that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off
devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as
prescribed by your country's laws.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty
against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk
accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles
you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions
are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
non-contact
0.1%
±4%
wall: 0–96%
masonry: 0–100%
softwood: 0–60%
hardwood: 0–36%
0... +40°C (operating), –10...+50°C (storage) /
32...104°F (operating), 14...122°F (storage)
0–90%
5 min
3pcs AAA batteries
77x30x153mm / 3x1.1x6in
5