How To Use Sackit Lamp Intelligent - SACKit Lamp intelligent Bedienungsanleitung

HOW TO USE SACKIT LAMP INTELLIGENT

SACKit Lamp Intelligent is switched on
and operated by pressing the top of the
lamp (A).
A
Fifth press turns
off the light
PRESS &
HOLD DOWN
PRESS &
HOLD DOWN
turns on the lamp
First press
*Saved brightness
on
Fourth press increases
brightness to 100%
Reset Mode:
If you experience trouble with a lamp you can reset it by putting it into Reset Mode.
This is done by first turning off the lamp. Then press and hold down the button for 10
seconds until the light starts flashing.
Release the button and the lamp is now reset.
Deep Sleep Mode:
When the lamp is turned off, it still uses a little power to search for your app.
If you want to turn off the lamp completely to avoid using any power, it must be put
into Deep Sleep Mode.
This is done by first turning on the lamp. Then press and hold down the button for 15
seconds until the light starts flashing.
Release the button and the lamp is now in Deep Sleep Mode.
NOTE:
You cannot use the app to turn on a lamp that is put into Deep Sleep Mode.
*Saved Brightness:
When the lamp is on, you can set your own brightness at any time by pressing and
holding the 'Power button'. When you hold down the button, the brightness will change
and either go towards a brighter or dimmer light. When you release the button, this
brightness will be saved as; 'Saved brightness'.
This setting will always be the first brightness at which the lamp is turned on.
NOTE:
You can only save one brightness at a time.
Second press change
brightness to 33%
Third press increases
brightness to 66%
5