Herunterladen Diese Seite drucken

iKAMPER Skycamp Annex Plus Bedienungsanleitung Seite 3

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
・  T ent condensation is a phenomenon of dewiness that occurs on the inside surface
Condensation
of the tent when the temperature difference between the inside and outside of the
tent is large and the humidity inside is high.
・ Tents are usually used outdoors, so they can be vulnerable to condensation.
・  T o reduce condensation, reduce indoor and outdoor temperature differences and
moisture inside should be reduced as much as possible.
・ Frequent ventilation is a good way to reduce condensation.
・  M aintaining the product in the wrong way can reduce the lifetime of the product.
Maintenance
・  A fter use and before storing the product, dry it sufficiently in a well-ventilated shade and
remove the contaminants with a soft brush or towel. If the product is stored wet, it can
cause problems such as mold, odor, color transfer, and hydrolysis of the fabric.
・  I f the product is stored for a long time, fold it loosely and store it in a well-ventilated place
without direct sunlight. The enclosed storage bag is made in small sizes to increase
portability. It is not suitable for long-term storage because the product needs to be folded
tightly.
・  D o not store near heat sources or heating equipment. This causes deformation or
breakage due to heat.
・   D o not dry clean, do not machine wash. This may damage the fabric.
・  T his is made through rigorous quality control and inspection and has a one-year warranty
Warranty
period.
・   F or 1 year from the date of purchase, iKamper will repair or replace (at our option)
defective parts at no cost to the customer if they need to be repaired due to performance
or functional defects during normal use.
・  A fter-sales services may not be provided for damage or defects caused by the following
reasons:
- Normal wear and tear, or cosmetic blemishes occurring as a result of use.
- If the product is arbitrarily repaired or modified by the customer.
- Damage caused by careless storage and use.
- Discoloration due to UV exposure or poor maintenance.
English
3

Werbung

loading