Celestron 2MP Digital Imager Bedienungsanleitung Seite 3

2. SETUP
A. REMOVE THE EYEPIECE AND REPLACE WITH THE IMAGER
1. Remove the eyepiece from your microscope.
3. If your microscope has a 30mm eyepiece cup, attach the
30mm collar adapter to the imager before inserting it into
the eyepiece tube.
2. Replace the eyepiece with the imager.
NOTE: Be sure to remove the protective cap from the imager first.
B. INSTALL SOFTWARE - WINDOWS
Download the latest version of the Celestron Digital Imager HD
+
Software for Windows from the Celestron website.
Click the "Install" button and follow the Setup Wizard as it guides
+
you through the installation.
C. INSTALL SOFTWARE - MAC
Download the latest version of the Celestron Digital Imager HD
+
Software for Mac from the Celestron website.
Open the software file and follow the on-screen prompts to install
+
the software on your Mac.
ENGLISH 3