reer MOSAIC MSC Kurzanleitung

MOSAIC COMMUNICATION CONNECTOR (MSC)
INTRODUCTION
MSC is a 5 poles connector that permits the interconnection between the MOSAIC
modules (MOSAIC BUS).
Connection
TECHNICAL DATA
Connections
Operating temperature
Storage temperature
Relative humidity
Dimensions
Weight
8540788 • 10/01/2011 • Rev.1
1. Connect the same number of "MSC" 5-pole
rear panel connectors as the number of
units to be installed (except for the relays
modules that don't need this connector).
2. Fix the train of connectors thus obtained to
the DIN rail (hooking them at the top first).
THE FEMALE CONNECTOR MUST BE ON
THE LEFT (FRONT VIEW).
3. Fasten the units to the rail, arranging the
contacts on the base of the unit on the
respective connector.
4. Press the unit gently until you feel it snap
into place.
(h x l x p)
5 poles
-10 ÷ 55°C
-20 ÷ 85°C
10% ÷ 95%
36,5 x 29,2 x 20,5 mm
5,2 g
MSC Mosaic
2