Monster Rattan Egg Chair Bedienungsanleitung Seite 5

USER GUIDE
ASSEMBLY INSTRUCTIONS
5. Next, let's assemble the Egg Chair. Connect Part (A) and Part (B) of the Egg Chair by
aligning the parts together and securing them in place using the 4 Hex bolts and nuts
(M6) provided. Use the Allen Key to tighten the bolts.
6. Slide the Steel pin into the designated hole at the
top of the curved Crane part (A). Attach the Spring
hook to the Steel pin, and the Egg Chair chain to the
Spring hook as shown here.
7. Strap the Pillow set to the Egg Chair by tying them to
the Egg Chair frame.
27977 - 28007 - RATTAN EGG CHAIR
5