Monster Rattan Egg Chair Bedienungsanleitung Seite 4

USER GUIDE
ASSEMBLY INSTRUCTIONS
1. Start by placing the Frame base (A) on a flat surface to ensure the product is stable
throughout the assembling process.
2. Attach the Frame base feet (B and C) to the base (A) by sliding the metal bars into the
hollow ends of the base (A). Secure the Frame base feet (B and C) in place with 1 Hex
bolt and nut (M10) for each base foot.
3. Next, build the crane by sliding the Crane (B) into the hollow top end of the base (A).
Secure this in place using 2 Hex bolts and nuts (M10), and tighten these with the Allen
Key. Follow the illustration below.
4. Continue assembling the crane by sliding the curved Crane part (A) into the Crane part
(B) and securing this in place with the 2 Hex bolts and nuts (M10), as shown above.
4