Mc Haus artic-12 Bedienungsanleitung Seite 40

ASSEMBLY
PLACE OF ASSEMBLY
Carry out the installation in a flat and dry place, 50cm should be left free
around the device to allow a regular air circulation, as shown in Fig. 1
(before connecting the exhaust pipe).
EXHAUST PIPE ASSEMBLY
2
MOUNTING THE WINDOW SEAL PLATE
Insert the air exhaust duct into the window sealing plate,
adjust the width of the window opening so that the window
can coincide with the sealing plate correctly; the length of
the sealing plate is adjustable (Fig. 3).
WARNING! Incorrect installation will affect
the work of the air conditioner.
Prevent the exhaust duct from bending
seriously.
Make sure that air can flow smoothly in the
duct.
Mc HAUS
Connect the exhaust pipe connector and the window kit adapter to each end of the
exhaust pipe. Then connect the connector to the appliance Fig. 2.
WARNING! The maximum length of the exhaust pipe is 1500 mm. We recommend
using the minimum length to save energy.
The length of the exhaust pipe is specially designed according to the specifications
of the air conditioner. Please do not use other exhaust pipes of different length or
materials, it may cause a breakdown.
artic-12
1
3