HammerSmith M22606 Gebrauchsanweisung Seite 17

(95 mm x 95 mm x 95 mm)
P60 for rough sanding
P120 for finishing
P240 for fine sanding
B. Sawing with the oscillating saw blade
Always wear eye protection. Use only undamaged
saw blades that are in full working order. Make sure
that you have a secure footing and hold the device
firmly with both hands at a sufficient distance from
your body. Before you saw the workpiece, first check
that no foreign objects such as nails and screws are
present. These must be removed before starting
work. It is only intended for cutting soft materials,
such as wood or plasterboard.
THE OSCILLATING SAW IS NOT SUITABLE FOR
CUTTING INTO STONE OR CONCRETE WALLS.
C. Scraping with the oscillating scraper
Old carpet adhesive and wallpaper residues can be
removed smoothly with the help of the oscillating
scraper. Always work at the correct angle, so as not
to damage the carrier material.
This symbol means that such electrical
equipment or batteries must not be
disposed of with normal household
waste. You are legally obliged to hand in such items -
free of charge - to a public collection point or distributor-
created collection point for the recycling of electrical
devices and expired bulbs and batteries within the scope
of the Electrical and Electronic Equipment Act that are
not encapsulated by or fixed into the appliance, and can
be removed or separated from the appliance non-
destructively, for disposal at the end of their service life.
Use rechargeable batteries instead of single-use
batteries wherever possible. The recovery and recycling
of old appliances makes an important contribution to
protecting our environment. Improper disposal can
result in toxic substances being released into the
environment, which can have harmful effects upon
people, animals and plants. Batteries with an increased
pollutant content are also marked with the following
symbols: Cd = cadmium, Hg = mercury, Pb = lead.
Consumers are themselves responsible for deleting any
personal data from appliances.
This product complies with the European
directives.
Protection rating II
M22606_HammersmithMultitool_Manual_A5_20220126_TC_V02.indd 17 M22606_HammersmithMultitool_Manual_A5_20220126_TC_V02.indd 17
SPECIFICATIONS:
The product must be stored in a dry place and must
not be exposed to direct sunlight during transport.
Operating temperatures and humidity: 10 - 35°C ≤
65% relative humidity
Temperature and humidity for storing the tool:
10 - 25°C ≤ 65% relative humidity
Average shelf life: 500 cycles
Protection class: IPX0
Motor voltage: 18 V DC
Idling n : 20,000 rpm
0
Drill attachment
Speed rpm: n : 0 - 350/0 - 1,200 rpm
0
Tightening torque: max. 25 Nm
Dimensions of the drill opening: 1.0 - 10 mm
Drilling diameter
for wood: max. 25 mm
for steel: max. 8 mm
Motor speed with no load: n
Weight 0.55 kg (1.55 kg multi-functional tool with
battery pack)
DRILL/SCREWDRIVER
NOISE:
Sound pressure level Lpa: 81 dB - relative
fuzziness Kpa: 3 dB, sound power level
Lwa: 92 dB - relative fuzziness
Fuzziness Kwa: 3 dB
VIBRATION
Screwdriver mode:
Vibration value ah = 2.03 m/s2 - uncertainty k = 1.5
m/s2
Drill mode:
Vibration value ah, ID = 0.98 m/s2 - uncertainty k =
1.5 m/s2
Multifunctional tool
Oscillation rate n : 0 - 16,000 rpm
0
Oscillation angle: 3.00
Weight 0.29 kg (1.27 kg multi-functional tool with
battery pack)
Sound pressure level Lpa: 83 dB - relative
fuzziness Kpa: 3 dB, sound power level Lwa: 94
dB - relative fuzziness Kwa: 3 dB,
Vibration value = 2.92 m/s2 - uncertainty k = 1.5
m/s2
Battery (Li ion)
Nominal voltage ... ... 18 V DC
Capacity ... ... ... ... .. 2. 0 Ah
Charge time ... ... ... approximately 1 hr
17
20,000 rpm
0
15.02.22 14:31 15.02.22 14:31