Storage Capacity - TANDBERG DLT4000 Bedienungsanleitung

• Insert the cartridge into the drive with a slow, steady motion.
• Do not drop or bang the cartridge. This can displace the tape leader, making the cartridge unusa-
ble and possibly damaging the drive.
• Keep tape cartridges out of direct sunlight and away from heaters and other heat sources.
• Place an identification label only in the slide-in slot on the front of the cartridge.
• Do not adhere labels to a cartridge anywhere except in the slide-in slot.
Tandberg DLT4000 Media Compatibility

STORAGE CAPACITY

Hardware Data Compression
DLTtape™IV
DLTtape™IIIXT
DLTtape™III
* Assuming 2:1 data compression – capacity may vary depending on native data.
Default = The density that will be recorded on a blank tape cartridge without an override from either the application software or
from the Density select button.
Override = The lower density that may be selected to be recorded on the tape cartridge from BOT with an override from either the ap-
plication software or from the Density Select button.
NOTE:
The density may only be selected/overridden from BOT (Beginning Of Tape). On tape which already contains
pre-recorded data, the pre-recorded density will automatically be selected by the drive.
40GB* 20GB 30GB*
Yes No Yes
Default Override N/A
N/A N/A Default
N/A N/A N/A
15GB 20GB* 10GB
No Yes No
N/A N/A N/A
Override N/A N/A
N/A Default Override Override Override
6GB 2.6GB
No No
N/A N/A
N/A N/A