Indel B TB31.2 Bedienungsanleitung Seite 20

TB31 . 2 TB 41 . 2 TB51 . 2
US E
Power On/Off
- Plug in the DC power. Press the button `ON/OFF` to run the refrigerator. The LED display on the control
panel would be lighted and the interior temperature would be displayed.
Setting the temperature
- Press the button + and - to adjust the temperature. Press the button + to increase while the button - to
decrease the temperature.
MAX/ECO mode
- When the device is switched on, press the "MAX/ECO" button to select the operating mode (the default
setting is MAX).
When you switch from MAX mode to ECO mode, the ECO light turns on and the compressor runs
always at minimum speed, to keep the inside the refrigerator cool but with lower energy consumption.
Conversely, when you switch from ECO to MAX mode, the MAX light turns on and the compressor runs
at maximum speed with maximum cooling efficiency.
The product will switch on in the same operating mode as when it was turned off.
Selecting °C and °F
- With the device switched off, press and hold the MAX/ECO
While C/F is flashing on the display, you can change the temperature from °C to °F and vice versa with
the and buttons.
TB31.2-TB41.2-TB51.2_19-01-2022
MAX
ON/OFF MAX/ECO
ECO
and
18
buttons for 3 seconds.