LEGRAND Sanus FMF319-B2 Bedienungsanleitung Seite 7

STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
• Mount arm assembly
08
• Minimum solid concrete thickness: 8 in. (203 mm)
• Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1
07
4
directly onto concrete surface (no wall covering)
2
07
A
08
08
002862.eps
Solid Concrete or Concrete Block Installation
3 in. (76 mm)
3/8 in.
(10 mm)
5
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts 09
. DO NOT over-tighten the lag bolts
the wall plate 08
Concrete Installation Kit CMK1 is not included
Contact Customer Service to inquire about the
additional hardware.
3
C1
C1
Fischer UX10 x 60R - included in the Concrete
Installation Kit CMK1.
08
10
only until the washers are pulled FIRMLY against
09
10
09
09 .
.
7