Safety Instructions; Technical Data - Hard Head 013990 Bedienungsanleitung

EN

SAFETY INSTRUCTIONS

NOTE:
Never store emergency keys in the safe.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Battery
Size
Weight
Volume
Material
Wall thickness
Door thickness
Emergency keys
DESCRIPTION
1. Lock bolts
2. Reset button
3. Battery compartment
4. Knob (main key)
5. Emergency lock cover
6. Green light
7. Red light
8. Yellow light
9. Confirm button
FIG. 1
10
4 x 1.5 V AA
H 200 x W 310 x D 200 mm
Sheet steel
INSTALLATION
INSERTING THE BATTERIES
1. Open the door.
2. Insert four AA batteries in the battery
compartment.
3. In normal circumstances the batteries
should be replaced if both the red and
green lights go on at the same time.
INSTALLING THE SAFE
1. Drill a screw holes at the required place.
2. Screw expander screws anticlockwise to
separate.
3. Mount the safe on the wall with expander
screws, or the like.
4. Check that the safe is correctly positioned
and tighten the screw unions.
IMPORTANT:
4.5 kg
• Use screws suitable for the underlying
8,5 l
surface.
• Insert four new batteries with the correct
1 mm
polarity as shown by the markings in the
battery compartment.
3 mm
2
• If the power supply has been interrupted
for more than 30 minutes, you must
enter a new user code.
USE
OPENING THE SAFE FOR THE FIRST
TIME
Use the emergency key to open the safe the
first time. Follow the instructions in the section
on opening the safe with the emergency key.
1. Remove the emergency lock cover,
insert the emergency key and turn it
anticlockwise.
2. Turn the knob (main key) clockwise to
open the door.
3. Complete this operation, pull out the
emergency key and store it in a safe place.