Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Compact instant water heater, 3000 W
Item no. 2623641
1 Intended use
The product provides hot water at frost-protected cold water connections. The product is in-
tended for indoor use only. Do not use it outdoors. The product is IPX4 rated and protected
against water splashes from any direction. It must not be immersed in water. It must only be
connected to standard domestic cold water outlets. A splash-proof grounded socket must be
located right near the water connection. You can adjust the water temperature at the outlet.
Using the product for purposes other than those described above may damage the product.
Improper product use can cause a short circuit, fire, electric shock, other hazards.
This product complies with statutory, national and European regulations. For safety and ap-
proval purposes, you must not rebuild and/or modify the product.
Read the instructions carefully and store them in a safe place. Always provide these operating
instructions when giving the product to a third party.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
2 Delivery content
Product
2 brass adaptors
3 silicone O-rings
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Explanation of symbols
The following symbols appear on the product/device or in the text:
This symbol warns of hazards that can lead to injury.
This symbol warns of a dangerous voltage which can lead to injuries due to electric
shock.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General information
This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous play-
thing for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Please handle the product carefully. Impact, shocks or a fall even from a low height can
damage the product.
5.3 Operating environment
Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours,
and solvents.
Protect the product from direct sunlight.
Never switch the device on immediately after taking it from a cold into a warm environment.
This may cause condensation to form, which can destroy the product. Allow the product to
reach room temperature before using it.
Universal hose adapter
Operating instructions
www.conrad.com/downloads
or scan the QR code
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
5.5 Power cord
Do not modify or repair power supply components, including power plugs, power
cords and power adapters. Never use damaged components. Danger of death
from electric shock!
The mains outlet must be located near the device and be easily accessible.
The device must only be connected to a grounded socket. Do not use multiple sockets or
extension cords.
Never plug in or unplug the mains plug when your hands are wet.
Never disconnect the mains plug from the socket by pulling on the cable. Always pull it out
of the mains socket using the intended grips.
Unplug the mains plug from the mains socket if you do not use the device for a long time.
Unplug the device from the power outlet during a thunderstorm for safety reasons.
Make sure that the power cord is not squeezed, bent, damaged by sharp edges or put
under mechanical stress.
Avoid excessive thermal stress on the power cord from extreme heat or cold.
Do not modify the power cord. Otherwise the power cord may be damaged. A damaged
power cord can cause a fatal electric shock.
Do not touch the power cord if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker),
and then carefully pull the mains plug out of the mains socket.
– Never use the product if the power cord is damaged.
A damaged power cord may only be replaced by the manufacturer, a workshop commis-
sioned by the manufacturer or a similarly qualified person to prevent any danger.
Make sure that the cable is not pinched, kinked or damaged by sharp edges.
Always lay cables so that nobody can trip over or become entangled in them. Failure to do
so could result in injury.
5.6 Connected devices
Always observe the safety information and operating instructions of any other devices con-
nected to the product.
6 Product overview
1
2
1 Cold water inlet (intake), M22
2 Water outlet
3 Temperature display (water outlet)
5
4
3
4 Water temperature controller
(HOT = hot, COLD = cold)
5 Power cord with earthing contact
Werbung
Inhaltsverzeichnis
