Technical Data - Niko 350-10032 Gebrauchsanleitung

4. TECHNICAL DATA

Supply voltage ..................................................... 24V AC/DC ±10%
Contact voltage .................................................... N.O. 4A 250V AC
Max. load ............................................................ 40W
I load ................................................................... 150mA / 24V DC
Power consumption ............................................. ±1W
Lux range ............................................................ 2 to 200lx
Hysteresis............................................................ ±50%
Delay .................................................................. ±1min
Degree of protection............................................. IP54
Temperature range ............................................... -50 to +50°C
Outer dimensions ................................................. 103 x 73 x 47mm
CE in accordance with .......................................... EN60669-2-1
5. WARNINGS REGARDING INSTALLATION
- The installation should be carried out by a registered installer and in compliance with the
statutory regulations.
- This user manual should be presented to the user. It should be included in the electrical
installation file, and it should be passed on to any new owners. Additional copies are
available on the Niko website or via the Niko support service.
- During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read
within the scope of each specific installation.
- the rules of proper workmanship.
This product complies with all of the relevant European guidelines and regulations. If
applicable, you can find the EC declaration of conformity regarding this product at www.
niko.eu.
EN
350-10032
11