Samsung HW-Q600C Bedienungsanleitung Seite 5

06 TROUBLESHOOTING
al
Before seeking assistance, check the following.
Soundbar does not turn on.
• Check whether the power cord of the Soundbar is correctly inserted
into the outlet.
Subwoofer does not connect automatically.
• Follow the steps below to connect the subwoofer manually.
1. Subwoofer
연결
2. Remote
Control
사운드
모드
3. Soundbar
음량 우퍼레벨
SOUNDBAR
4. Connection
complete
Soundbar works erratically.
• After removing the power cord, insert it again.
e
• Try again after resetting the product.
• If there is no signal, the Soundbar automatically turns off after a
certain period of time. Turn on the power.
If the remote control does not work.
• Point the remote directly at the Soundbar.
T"
• Replace the batteries with new ones.
Soundbar does not output any sound.
• The volume of the Soundbar is too low or muted. Adjust the volume.
• When any external device (STB, Bluetooth device, mobile device, etc.)
is connected, adjust the volume of the external device.
• For sound output of the TV, select Soundbar.
(Samsung TV: Home (
( ) → Sound → Sound Output → Select Soundbar)
me
• Remove the cable from the Soundbar and then reconnect it.
Subwoofer does not output any sound.
• Check whether the LED on the rear of the Subwoofer lights in blue.
Reconnect it when the blue LED blinks or the red LED lights.
th
e B
; ;
5 Sec
Red and Blue is On
연결
First, press the button on the
remote control to turn on the
display, and then press the Up
button on the remote control
5 Sec
for at least 5 seconds.
사운드
모드
음량 우퍼레벨
ID SET
SOUNDBAR
The LINK LED indicator stops blinking and
glows a solid blue (connection complete).
) → Menu → Settings (
If the TV is not connected via HDMI TO TV (eARC/ARC).
• Check whether the HDMI cable is correctly connected to the eARC
terminal.
• Connection may not be possible due to the connected external device
(set-top box, game console, etc.). Directly connect the Soundbar.
• HDMI-CEC may not be activated on the TV. Turn on the CEC on the TV
menu. (Samsung TV: Home (
All Settings (
Anynet+ (HDMI-CEC) ON)
Soundbar does not connect via Bluetooth.
• When connecting a new device, switch to "BT PAIRING" for
connection. (Press the
the
;
• Reconnect it after removing the Bluetooth speaker list on the device
to connect. (Samsung TV: Home (
Blinking All Settings (
blue fast List)
Sound drops out when connected via Bluetooth.
• Some devices can cause radio interference if they are located too
close to the Soundbar. e. g. microwaves, wireless routers, etc.
• If your device that is connected via Bluetooth moves too far away
from the Soundbar, it may cause the sound to drop out. Move the
device closer to the Soundbar.
• If a part of your body is in contact with the Bluetooth transceiver
or the product is installed on metal furniture, sound may drop out.
Check the installation environment and conditions for use.
Soundbar does not turn on automatically with the TV.
• When you turn off the Soundbar while watching TV, power
synchronization with the TV is disabled. First turn off the TV.
07 LICENCE
Dolby, Dolby Atmos, and the double-D symbol are registered
trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories.
Confidential unpublished works. Copyright © 2012-2021 Dolby
Laboratories. All rights reserved.
) → All Settings
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS, Inc. or DTS Licensing Limited. DTS, DTS:X, and
the DTS:X logo are registered trademarks or trademarks of DTS,
Inc. in the United States and other countries. © 2021 DTS, Inc. ALL
RIGHTS RESERVED.
) → Menu → Settings (
) → Connection → External Device Manager →
PAIR button on the remote control or press
(Source) button on the body for at least 5 seconds.)
) → Menu → Settings (
) → Sound → Sound Output → Bluetooth Speaker
) →
) →
English - 5